3-Position Recliner, Bariatric
Product Summary
- 3 positions: upright (Figure A), deep recline and elevated leg rest/footrest. (Figure B)
- Retractable lock bar secures the chair in the desired position.
- Self-adjusting suspension in the seat prevents bottoming out.
- Side panels “pop off” for easy cleaning and maintenance.
- Large, blow-molded tray locks in 5 positions and can be stored on the side of the chair.
- 5″ casters (2 with locks) make it easy to move and secure the recliner.
- Wide, comfortable armrests are angled to provide support in any reclined position.
- Neutral-colored, sturdy steel frame is easy to clean and maintain.
- Moisture barrier on seat prevents seepage.
- Comfortable built-in headrest.
- Foam and vinyl meet California Technical Bulletin 117.
Specifications
Specifications
| Overall Dimensions | 47.5″ (H) x 32″ (W) x 41.5″ (D) |
|---|---|
| Width Between Arms | 24.5″ |
| Arm Height From Floor | 26.5″ |
| Arm Height From Seat | 9.5″ |
| Seat Dimensions | 21″ (H) x 25″ (W) x 20″ (D) |
| Carton Shipping Weight | 127 lbs. |
| Weight Limit | 500 lbs. |
| Warranty | Limited Lifetime on Frame, 1 Year on Upholstery and Moving Parts |
Downloads
Downloads
Owners Manual
Catalog Page
Parts Diagram
Products
Products
| Item # | Color | HCPCS* | UOM | |
|---|---|---|---|---|
| D574EW-BR | Select | Blue Ridge | E1031 | 1/cs |
| D574EW-J | Select | Jade | E1031 | 1/cs |
| D574EW-R | Select | Rosewood | E1031 | 1/cs |
Parts
Parts
| Diagram Number | Part Description | Part Number | |
|---|---|---|---|
| 1 | Lower Push Handle | D574EW-1003 | |
| 2 | Headrest Adj. Bracket | D574EW-1048 | |
| 3 | Back Blue Ridge | D574EWBACK-BR | |
| 3 | Back Jade | D574EWBACK-J | |
| 3 | Back Rose | D574EWBACK-R | |
| 4 | Seat Blue Ridge | D574EWSEAT-BR | |
| 4 | Seat Jade | D574EWSEAT-J | |
| 4 | Seat Rose | D574EWSEAT-R | |
| 5 | Legrest Blue Ridge | D574EW-1009BR | |
| 5 | Legrest Jade | D574EW-1009J | |
| 5 | Legrest Rose | D574EW-1009R | |
| 6 | Footrest Blue Ridge | D574EW-1010BR | |
| 6 | Footrest Jade | D574EW-1010J | |
| 6 | Footrest Rose | D574EW-1010R | |
| 7 | Support Bar & Hdwr | D574EW-1011 | |
| 7 | Hardware Only | D574P-1061 | |
| 8 | Reclining Mechanism | D574EW-1035 | |
| 9 | Protecting Panel | D577P-1012 | |
| 10 | Tray | D574EW-1065 | |
| 11 | Table Washer | D574P-1037 | |
| 12 | Table Fitting | D574P-1036 | |
| 13 | Table Slide Tube | D574P-1064 | |
| 14 | Side Panels | D574P-1020 | |
| 15 | Front Caster | D574P-1027 | |
| 16 | Rear Caster | D574P-1025B | |
| 17 | Frame Old Style | D574EW-1017 | |
| 17 | Frame New Style | D574EW-1017N | |
| 18 | Armrest Old Style Blue Ridge | D574EW-1070BR | |
| 18 | Armrest Old Style Jade | D574EW-1070J | |
| 18 | Armrest Old Style Rose | D574EW-1070R | |
| 18 | Armrest New Style Blue Ridge Left | D574EW-1070NL-BR | |
| 18 | Armrest New Style Blue Ridge Right | D574EW-1070NR-BR | |
| 18 | Armrest New Style Jade Left | D574EW-1070NL-J | |
| 18 | Armrest New Style Jade Right | D574EW-1070NR-J | |
| 18 | Armrest New Style Rose Left | D574EW-1070NL-R | |
| 18 | Armrest New Style Rose Right | D574EW-1070NR-R | |
| 19 | Seat Frame | D574EW-1013 | |
| 20 | Locking Bar | D574EW-1050 | |
| 21 | Hardware | D574EW-1004 | |
| 21 | Blue Ridge after serial # | 6A1208000001 | |
| 21 | Jade after serial # | 6A1209000001 | |
| 21 | Rose after serial # | 6A1208000018 |
Order Now!
Order Now!
[gravityform id=”1″ title=”false” description=”false”]
Shipping and Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
“T” Style Half Rails
$116.00
Product Summary
- Attractive brown-vein finish. (Figure A)
- Constructed of 1" steel.
- For use with “Pan-Style” beds and Bariatric Beds (item #’s 15300, 15302 and 15303).
- Ideal protection without confining the patient.
- New and improved design prevents rail from shaking.
- Provides maximum protection when bed is elevated.
- For use with most manufacturers' beds.
Bariatric Overbed Table
$925.28
Product Summary
- Base and columns available in additional powder-coat finishes.
- In the locked position, the table can support 500 lbs. (Figure A)
- Structurally reinforced with a steel welded frame.
- Frame extends virtually the entire length of the top.
- Table top height adjusts from 30" to 45" in 1" increments.
- Large, high pressure laminate table top measures
- 18" x 40" to reach the center line of most bariatric beds.
- Powder-coated base and column.
- 2" swivel casters make for easy maneuverability.
Non-Tilt Automatic Overbed Table
Product Summary
- Spring loaded lift mechanism – height adjustment from 30" – 45".
- ¾" x 18" x 32" high pressure laminate top with T- molding.
- 2" casters for easy maneuvering.
- Column can be mounted on left or right side.
- Available with “H” (Figure A) or “U” base in chrome or opal powder coat.
- Optional dual mirror vanity drawer.
- Base and columns available in additional powder coat finishes.
- Available on drop ship basis only.
Non-Tilt Automatic Overbed Table
Product Summary
- Spring loaded lift mechanism – positions top in 1" increments from 30" – 45".
- ¾" x 15" x 30" high pressure laminate top with T- molding.
- 1.5" Casters.
- 100 lbs. weight capacity.
- Available with “H” base in chrome or opal powder coat.
- Optional dual mirror vanity drawer.
- Base and columns available in additional powder coat finishes.
- Available on drop ship basis only.
Non-Tilt Designer Overbed Table
Product Summary
- Spring loaded lift mechanism – provides infinite adjustment from 28"- 45".
- MDF core with formed vinyl top.
- 15" x 30" top with ½" bullnose edgemold provides
- a protective ¼" lip against spills.
- Twin wheel 2" casters for easy maneuvering.
- Available with “H” or “U” base (Figure A) in chrome
- or opal powder coat.
- Optional dual mirror vanity drawer.
- Base and columns available in additional powder
- coat finishes.
- Available on drop ship basis only.
Non-Tilt Pneumatic Cylinder Overbed Table
Product Summary
- Pneumatic cylinder lift mechanism – infinite height adjustment from 27" – 42".
- ¾" x 18" x 32" high pressure laminate top with T- molding.
- 2" casters for easy maneuvering.
- Column can be mounted on left or right side.
- Available with “H” (Figure A) or “U” base in chrome or opal powder coat.
- Optional dual mirror vanity drawer.
- Base and columns available in additional powder coat finishes.
- Available on drop ship basis only.
Non-Tilt Premium Multi-Feature Overbed Table
Product Summary
- Pneumatic cylinder lift mechanism provides infinite adjustment from 27" – 42".
- High pressure laminate top with raised urethane lip for spill containment.
- Dual removable cup holders with flexible grip tabs.
- Storage between cup holders – perfect for pens, cell phones, etc.
- Dual hand grips and 2" casters for easy maneuvering.
- Column can be mounted on left or right side.
- Available with “H” or “U” base in chrome or opal powder coat.
- Optional dual mirror vanity drawer.
- Base and columns available in additional powder coat finishes.
- Available on drop ship basis only.
Pivot & Tilt Overbed Table
$142.61
Product Summary
- The mast of the table pivots and can be locked in one of the three positions from flat on the floor to 90°. (Figure A)
- New and improved larger tubing.
- The pivot feature allows the table top to be positioned closer to individuals in a bed, sitting in a wheelchair, or folded for storage.
- The tabletop tilts with the angle of the mast to provide a flat surface regardless of the angle of the mast.
- Four 2" casters (two locking).
- Only wheels have to be installed.